bing tracking image

Filter Questions and Answers:

reset filter

Expert Answers about Forest River No Boundaries Travel Trailer


  • Go Power Solar Panel Controller for Use with Two Batteries
  • The Go Power PWM Solar Charge Controller with Bluetooth # 34276119 will work great to charge your two batteries as that was what it was designed for. With this and additional panels it would not require anything else.
    view full answer...

  • How to Determine Correct Electric Brakes For 2020 No Boundaires 19.5
  • We very likely have the correct electric drum brakes for your 2020 Forest River No Boundaries 19.5 travel trailer, but don't know offhand which brakes you need. To find the correct brakes, you just need to know the weight capacity you need, and the inside diameter and depth of your drum. For example, the Dexter Nev-R-Adjust Electric Trailer Brake Kit # 23-468-469 are for 3,500 lb axles and measure 10" diameter x 2-1/4" wide (so that is the drum size they fit in). From what I could find...
    view full answer...

  • Recommended MaxxAir MaxxFan Vent Cover 2022 Forest River 26RK Vibe Travel Trailer
  • Some models of MaxxFan Vents have little tabs (pictured below) that allow for a quick and simple installation of vent covers like the MaxxAir II RV and Trailer Roof Vent Cover w/ EZClip # MA76JR or # MA86JR for black. These tabs allow you to clip your cover to the roof vent without having to drill into the vent/roof of your 2022 Forest River 26RK Vibe. If you vent does not have these tabs then you can just use the provided brackets with either of these covers. The brackets will screw...
    view full answer...

  • Jack-It Bike Rack Compatibility With A 2019 Forest River No Boundaries 10.6 Travel Trailer
  • Since your 2019 Forest River No Boundaries Travel trailer appears to have a welded on jack you'll have to remove the handle and slide the Jack-It 2 Bike Rack for A-Frame Trailers # LC429756 over the jack for this to work. This rack has a hole 2-3/8" in diameter for the jack to slide through. If your jack is larger than 2-3/8" in diameter then you'll need to use an A-Frame trailer mounted rack carrier like the Swagman Straddler # S80503 and then a hitch mounted bike rack like the Swagman...
    view full answer...

  • Replacement Door Latch that Fits 2020 Forest River No Boundaries 19.5
  • Thanks for all of the latch cut out dimensions of your 2020 Forest River No Boundaries 19.5 based on that the Bauer door latch part # BA54FR that you referenced is for sure a fit and would work great.
    view full answer...

  • Roof Rack For Forest River No Boundaries With Rhino-Rack Tracks & Kayak Carrier
  • Based on my research your Forest River No Boundaries should have Rhino-Rack tracks on top, so you'd just need the feet and then the appropriate length crossbars. Just measure between the tracks to get the right length, and you'll want the crossbars to be a bit longer than the track width. So here is what you'll need: - Rhino-Rack Quick Mount Legs # RRRLT600 - Rhino-Rack Vortex Aero Crossbar - 79" Long # RRVA200B-2, 71" Long # RRVA180B-2, or 65" Long # RRVA165B-2 Then for a kayak carrier,...
    view full answer...

  • Will A Denver Mattress Queen Mattress Fold Up In An RV Murphy Bed Frame
  • Denver mattresses like the Denver Mattress Rest Easy Euro Top RV Foam Mattress - 80" Long x 60" Wide # DE96ZR aren't designed to fold and wouldn't be able to fold up in your Murphy bed frame unless the entire mattress was being flipped up against the wall without folding. The folding options close to this are 75" Long x 60" Wide # DE28ZR or 76" Long x 72" Wide # DE44RR. There is no database for us to look at to determine which size would fit your specific trailer so you would need to...
    view full answer...

  • Can The Progressive Dynamics Power Center # PD4135K Replace A WFCO WF-8735P
  • The Progressive Dynamics 4100 Series RV Converter # PD4135K will replace the AC and DC distribution panels as well but can definitely be used as a lithium compatible replacement. If you want to keep your current setup but just replace the converter only then you could unwire the current converter and wire in a converter like part # PD9130LV. If you're fine with replacing the whole power center with the # PD4135K then you'll just want to flip the charging mode switch to "ON" to charge your...
    view full answer...